Sliding Patio Doors Repair
Sliding patio doors are an excellent way to take advantage of your outdoor space, but they can be difficult to open or close. This could be due to a variety of issues, such as dirty tracks or misaligned rollers.
Clean the track and Lubricating the rollers. You can also adjust the rollers using the adjustment holes located on the bottom of the movable door panel.
Tracks that are damaged or dirty
A damaged or dirty track can cause a sliding door to not move properly. Over time, dirt, grit, and even rust could build up making the track unable to move smoothly. The solution is to thoroughly clean using an abrasive and mild detergent. This task should be performed regularly to ensure a smooth operation and make sure that costly repairs are not required in the future.
A leaking door is another common problem that requires immediate attention to avoid water damage, mold growth and structural degradation. The problem is often caused by worn weather stripping and a misaligned doors. This can be fixed by replacing the old weather stripping and aligning the doors.
Another issue that is common and can be resolved with some DIY work is rollers that jump off the track. This task can be difficult, so ask a friend to help you. In the house, and then lean a panel towards you to move the rollers. When the panel is lifted off the bottom track, you'll need to place it on sawhorses in order to stop it from falling off. Then, loosen the roller's screws and pry them with the screwdriver. Then, you can clean any dirt that is stuck between the wheels and tracks. Then, clean each wheel using denatured alcohol and a rag, then reposition the wheels and attach them to their tracks.
If a section of the track is bent, it may be possible to straighten it by using a rubber mallet and block of wood. However when the bent section is close to the hinges and is likely to cause further damage, you'll better off calling in an expert for safety reasons.
Rollers that are misaligned
If your sliding door is having difficulty sliding, it's most likely that the rollers are not aligned correctly. The wheels could be rusted or dirty, and their bearings wear down. This friction causes the door to catch and grind when it is opened or closed. It can also cause sounds that squeak.
Fortunately, this is an easy fix. It is not necessary to take off the door to access the wheels, since they are on a bracket that's adjustable. Use a screwdriver and find the adjustment holes on the frame (usually on either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise movement lowers it. Continue to adjust until the door moves effortlessly and quietly when it is opened or closed.
It is important to adjust the wheel prior adjusting your latch. The latch hooks need to line up with the strike plate (the opening into which the latch locks) to allow the lock to function correctly. If you don't, the latch could accidentally open or close while you're away from the room.
Patio doors that slide are an investment, and keeping them working properly will keep your family safe and secure. By addressing common issues like broken tracks, rollers and handles, you can prevent costly repairs in the future. For assistance with your patio doors, call our team. We can help you maintain your sliding patio doors in top condition by evaluating the repair needs. Our professionals are also able to assist with any replacement parts you may need.
The door frame is loose or damaged
Doors for sliding patios are an excellent option for any home. They are a practical and attractive alternative to hinged or swing-open patio door options. Like all hardware items, sliding patio doors can develop problems over time. Fortunately, most of these issues are simple to repair with a little DIY know-how.
A common issue with sliding patio doors is gaps in the frame. This could be caused by a variety of factors, including rollers or tracks that are not aligned properly, a damaged track or door, or a bent frame for the door. In most cases, the problem can be easily fixed by taking the doors off and reconnecting the track. This must be done with caution to avoid cause damage to the track or frame.
In certain instances it might be necessary to replace the entire track, which can be done easily with an universal replacement kit that is readily available at major hardware stores. These kits are easy to install and will have your door functioning correctly in no time.
It is important to check the frame of your sliding door and hardware for signs of wear and tear, for instance loose bolts or screws. These can often be tightened using a screwdriver or wrench which makes this a simple and effective DIY patio door maintenance process. Additionally, it is important to oil your tracks and rollers to facilitate smooth operation and to prevent premature wear.
For many homeowners who live in the city, their patio doors are the primary access to their backyard and outdoor living space. As such, they need to to function correctly to maintain the comfort of their homes and provide security. If you follow these easy DIY maintenance techniques, homeowners can prolong the life of their patio door and reduce costly repairs or replacements.
Handle is not working properly
The sliding patio doors are a great way to get into your home and gain access to your backyard, however they can become difficult to operate when they become misaligned. A defective handle can cause the door not to open or close properly. Repairing a damaged handle can be accomplished at home.
In many instances, a loose handle is simply the result of screws that have worked through the backplate. To resolve this issue just tighten the two screws that are on the inside of the handle using the help of a screwdriver. If the handle is loose, it could indicate that the threads have worn away and require replacement.
A broken latch might be the culprit. This is more likely to occur if the latch made of plastic instead of metal. If the latch isn't catching or turning, you should try oiling it first to see if this can help. If not, you might require replacing the lock completely.
The handle, in turn, can become difficult to operate in the event that it is broken or cracked. If this happens it is necessary to replace it with a new handle that matches the style of your sliding patio door.
Whether your patio doors are outdated and old or brand new, Feldco can help you get them back on track. We have a variety of high-quality patio doors that come in a variety of sizes and styles. For more information about our doors, contact us now! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.
Faulty Weatherstripping
It's time to replace your weather stripping if you notice light coming from windows and doors, or feel a draft pulling at the door or window. The strips form a tight seal that blocks unwanted insects, air, and water from getting inside your home. This helps keep your heated and conditioned air inside, saving money on energy costs.
It may have lost its strong seal, bouncy, due to age. This can be identified by taking a dollar note and running it under the seal between the top of the door frame and at the bottom of the door jamb where the two overlap. If the dollar bill slides effortlessly between the seal and the door is the time to replace the weather stripping.
If patio door repairs replace the worn-out portion of weather stripping, this may cause problems in the future with the seal. It is much more effective to replace all the stripping. This will allow you to be sure that your door will be properly sealed.
Follow our DIY guide to weather stripping to install the right material on your sliding patio door, and frame, to ensure a tight, lasting seal. It's a great option to fix your door and reduce your energy bill, so don't wait until it's too late. Your wallet as well as your home will be thankful.